Electronic Voltage Regulator - AC 0-220V 6000W Super-high-Power SCR Voltage Regulator Dimming Dimmer with Electronic Thyristor (Silver）

Electronic Voltage Regulator - AC 0-220V 6000W Super-high-Power SCR Voltage Regulator Dimming Dimmer with Electronic Thyristor (Silver）

Product Features:
● Description: Use a new type of bidirectional high-power thyristor, because the current can reach 80 amps, which solves the overcurrent problem caused by the small resistance of the electric furnace wire when it is cooling; it can easily adjust the output voltage of the mains , Any adjustment between 0-100% (220 volts divided into 100 steps, non-linear), for use by electrical appliances. Such as: electric furnace, water heater heat adjustment, light adjustment of lamps, small motor speed adjustment, electric soldering iron temperature adjustment, etc. So as to achieve the effect of dimming, temperature regulation and voltage regulation.
● Features: The voltage regulator is equipped with a two-way high-power thyristor, which can be used without adding any components. It is very convenient and practical. It comes with a heat sink, and the heat sink is thickened and enlarged. The mains output voltage can be easily adjusted, and can be adjusted between 0-220v, and the power supply can be used.
● Power: 6000W (resistive load limited power), the power should be reduced for a long time, it is recommended to use the resistive load at room temperature within 3000W (key parameters)
● Note: This product is AC input, AC output, can only step down, must be connected to the load to adjust the voltage, the output must be connected to the load, it is useless to connect a multimeter without load, it is not a transformer, if there is no load connected to the output, the output voltage will not Change. This product is not a panacea, it cannot replace the battery charger of an electric vehicle, nor can it drive electrical appliances that use switching power supplies (such as 110v TV stereos -refrigerators - air conditioners - rice cookers with computers), nor can it drive induction cookers and energy-saving lamps. Note that the plastic cover on the connector is easy to break if you use too much force.

✅Type:6000W High Power Thyristor Electronic Voltage Regulator
✅Dimensions:130x60x47mm (5.12x2.36x1.85in)
✅Knob Inner Hole:6mm (0.24in)
✅Input Voltage:AC110V/220V
✅Output Voltage:AC10-220V
✅Regulating Voltage:AC 0-220V, Under Resistive Load Conditions, The Starting Adjustment Can Be More Than Ten Volts And The Callback Can Reach 0 Output Current:41A

Package Includes:
1 X Electronic Voltage Regulator

⚠️WARNING: This item might contain chemicals known to the State of California to cause cancer or birth defects. For more information, go to www.P65Warnings.ca.gov

Q1: What types of electrical appliances can this voltage regulator be used with?
A1: This voltage regulator can be used with various electrical appliances such as electric furnaces, water heaters, incandescent lamps, small motors, and electric soldering irons. It is suitable for applications requiring dimming, temperature regulation, and voltage regulation.

Q2: Can this voltage regulator be used for devices with switching power supplies?
A2: No, this voltage regulator cannot be used to drive electrical appliances that use switching power supplies, such as 110V TVs, stereos, refrigerators, air conditioners, and rice cookers with computers. It is also not suitable for induction cookers and energy-saving lamps.

Q3: How does the voltage adjustment work, and what is the range?
A3: The voltage regulator uses a bidirectional high-power thyristor to adjust the output voltage of the mains. The output voltage can be adjusted between 0-220V AC. The adjustment is not linear and is divided into 100 steps.

Q4: What are the power limitations for this voltage regulator?
A4: The voltage regulator has a maximum power rating of 6000W for resistive loads. For long-term use, it is recommended to use the device at room temperature within 3000W to ensure stable performance and longevity.

Q5: Does the voltage regulator need to be connected to a load to function?
A5: Yes, the voltage regulator must be connected to a load to adjust the voltage. If there is no load connected, the output voltage will not change. Using a multimeter without a connected load will not show any voltage adjustment.