20Pcs 3/4" Side Marker Lights, Round LED Front Rear Side Indicator Bullet Marker Light for Truck RV Car Bus Trailer, 150LM Amber, Waterproof Side Marker, Identification, Turn Signal Lights, 12V

Product Features:
20Pack Round Mini Light: Amber It can be used as a gap, side marker, identification light, turn signal, or trailer light. A good alternative to incandescent parts.
150 Lumens Per Luminaire: 3 PC high-quality SMD LED bulbs provide the ultimate bright light inside. Waterproof PC lens, shockproof, dustproof, rubber cover sealed light.
2 Wire Design: Including lead and ground wire, ensuring mounting on almost any surface; ground and other front black lines; Need to drill “3/4” holes to adapt the gasket and light; Universal All Cars, trailers, trucks, ships, etc.
Easy to Install in All Positions: Side front and rear chassis as external safety lights at night.
The Resistors Are Not Built-in: Just connect them directly. The only time you need a resistor is to use it as a turn signal or flash. If you replace the vehicle flash, you can use a resistor to overcome.

Type: 20 PCS Side Marker Light
Light Outer Diameter : 1'' x 1'' x 0.83''
Light Inner Diameter : 0.73''x 0.73'' x 0.83''
Material: Smoked PC Lens +ABS
Waterproof Rate: IP 67
Lights Color: Amber
Lens Color: Smoked
Light Source Power: 1 W
Voltage: 12V
Luminous Flux: 150LM
Lifespan: Over 50000 hours
Wiring: 2 wires

Package Includes:
20 PCS Side Marker Light

⚠️WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. www.p65warnings.ca.gov

Q1: What are the different uses for these side marker lights?
A1: These lights can be used as gap lights, side markers, identification lights, turn signals, or trailer lights. They are a good alternative to incandescent parts.

Q2: What is the light output of each marker light?
A2: Each marker light has a luminous flux of 150 lumens, provided by 3 high-quality SMD LED bulbs.

Q3: How do I install these lights?
A3: The lights have a 2-wire design (lead and ground) and require drilling 3/4" holes for installation. They can be mounted on various surfaces, including side, front, and rear chassis.

Q4: Are these lights waterproof and durable?
A4: Yes, the lights feature a waterproof PC lens with an IP67 rating, making them shockproof, dustproof, and durable.

Q5: Do I need resistors for installation?
A5: Resistors are not built into the lights. You will only need resistors if you use the lights as turn signals or flashers to prevent hyper-flashing.